Featuring a large flame pattern, the signature of the Nitro Concepts brand, is the back of the back of the S300EX. The PU leather looks of good quality and is pulled taught to reduce unsightly wrinkles. The logo is also stitched into the top of the chair. This stitching will match the colour choice, as will the flanks of the chair.
The rear of the chair is plain leather apart from a Nitro Concepts flame at the top.
Where you’ll place your bottom is rather boring, as far as gaming chairs go, there’s no pattern or breathability built in via perforations or anything of that kind, like we’ve seen on the noblechairs range. The armrests are 3D adjustable which means they can rise and fall, slide forwards and backwards and angled inwards and outwards.
The underside of the seat exposes the steel chassis, showing off its strength and durability. You can also see here the 3 bolts holding the arm-rests into place. These arm rests can be removed entirely if you wish, with them offering no structural support, or adjusted up to roughly 30mm outwards (a little over an inch)
The rear of the chair is plain leather apart from a Nitro Concepts flame at the top.
Where you’ll place your bottom is rather boring, as far as gaming chairs go, there’s no pattern or breathability built in via perforations or anything of that kind, like we’ve seen on the noblechairs range. The armrests are 3D adjustable which means they can rise and fall, slide forwards and backwards and angled inwards and outwards.
The underside of the seat exposes the steel chassis, showing off its strength and durability. You can also see here the 3 bolts holding the arm-rests into place. These arm rests can be removed entirely if you wish, with them offering no structural support, or adjusted up to roughly 30mm outwards (a little over an inch)
