Since Rocket is solely designed for Mini-ITX, we installed our Mini-ITX test system inside this case. The installation did take longer than expected due to the tight space limitations and reconfiguring certain parts – for example, the riser cable needs removing in order to have it feed behind the motherboard and we’d certainly advise doing this as the first step of any system installation.

The PSU bracket also needs to be removed from the chassis and attached to the PSU prior to moving the unit into the case. (As shown above). The orientation of the bracket and extension cable will vary depending on the design of your SFX unit and it took us a few attempts to attach the bracket in the correct way to the PSU and back into the chassis itself due to the limited space within.

Since the inside is rather cramped, we admittedly scratched some of the inside which was disappointing. Overall though, we’re pleased with how the installation went – our advice would be to just take your time!