Fractal Design Celsius+ S28 Prisma Review

👤by Matthew Hodgson  Comments 📅19-07-20

Technical Specifications

General specifications

Sockets supported (Intel): 1200, 1150, 1151, 1155, 1156, 1366, 2011, 2011-3, 2066
Sockets supported (AMD): AM2, AM2+, AM3, AM3+, AM4, FM1, FM2, FM2+, TR4 (via included bracket in AMD Threadripper box)
Coldplate material: Copper
Thermal paste: Pre-applied
Tube length: 400 mm
Tube material: Low-permeability rubber with braided nylon sleeve
Fittings, block side: Articulating 90-degree elbow
Fittings, radiator side: Straight rotary
Fan control: Dual mode (Auto/PWM)

Fan specifications

Fan type: Prisma AL-14 PWM ARGB
Rotational speed: 500 – 1700 RPM
Bearing: LLS
PWM control: Yes
Acoustical noise (full speed): 34.1 dBA
Maximum air flow: 103.9 CFM
Maximum static pressure: 2.38 mm H2O
Input voltage: 12V DC
Maximum input current: 0.18A
MTBF: 100,000 hours

Pump specifications

Rotational speed: 800-2800 RPM in normal use, 3500 RPM during thermal protection mode that activates if liquid temperature is over 60°C
Bearing type: Ceramic bearing and shaft
PWM control: Yes
Acoustical noise (full speed): 20 dBA
Maximum pressure, 50°C: 1.46 mm H2O
Input voltage: 12V DC
Input current (without fans): 0.36A
MTTF: 50,000 hours
Block height: 45 mm
Block measurements (with fittings): 86 x 75 mm
Block diameter (main block body): 62 mm